Recent content by valsim

i'm sure because i used this tv with a japanese grey saturn,with mi dreamcast using 60hz,with my jap gamecube!! i need a new saturn!!!bye!

hi,i soldered two wires to the two sides of jp1 and to an on-off switch, but.............nothing,it doesn't work!! if the switch is off the console works great in 50hz,if i switch to on the saturn goes crazy,i only see 9 screens on my tv in this way saturn saturn saturn saturn saturn saturn...

hi,thank you for helping me! i found the other jp points but the 50/60hz thing doesn't work!! i connected the two sides of jp1 with some copper wire WITHOUT soldering it!i only put it on jp1 and touching the two sides of jp1 in this way: jp1 *--------* but it didn't work! do you think that...

hi,i've got a pal saturn!it's first model,with two leds power and access! i opended it and i found that the power board is not connected to the upper side of the chassis and that the joypad ports are on another little board! i found the pin 79 but it doesn't continue to any point,it only goes...

hi,ok i've got the rarest saturn in the world!!! there is NO jp2!!!!there's only jp 1!! if i connect the two points of jp1 i only see black and gray lines on the screen of my television!! this saturn inside is very strange!! the power board is on the lower side,not connected to the upper...

hi i 've an MK80200-50 european saturn! i want to make it work at 60hz! i know that i must find the 79pin,then cut the line and so on! what i need is to find the +5v and the 0v points to solder!!! where are them? somewhere i read that i can solder the switch to some of the 8,9,10,11,12...