Pinout for 4-Pin Saturn

I recently got my hands on a Sega Saturn in non-working condition. The power supply is apparently bad, and I'd like to find a pin-out of a 4-pin (power supply) NTSC round-buttoned Saturn. I've been able to find a diagram of a 5-pin, but I've only been able to identify the ground pin on my supply.

If anyone can help me, it would be greatly appreciated.
 
Originally posted by Nephroth@Thu, 2005-11-10 @ 07:13 PM

I'd like to find a pin-out of a 4-pin (power supply) NTSC round-buttoned Saturn

[post=141612]Quoted post[/post]​


I hope this could help

PIN#1 = +5V

PIN#2 = +5V

PIN#3 = 0V or GROUND

PIN#4 = 0V or GROUND
 
Highly doubt so.

PIN 1 - 5V

PIN 2- 3.3V

PIN 3,4 - ground

Probably like this. If i'll remember it. I'll take a look on my PSU later. But there should be indication of voltage/ground near pins on PCB too.
 
don't doubt kukzz I based it on my own sega saturn PSU i opened up my unit before i posted it so I'm very sure on what i post :D but on the other hand yours might be right too, because there are hundred of sega saturn revisions out there with different voltage output on the PSU
 
Back
Top