• Rise from your gwave!

turbo to pc engine

Discussion in 'Retro Video Games' started by Xavier, Mar 9, 2002.

  1. Xavier

    Xavier Mid Boss

  2. ExCyber

    ExCyber Staff Member

    That's cool. Unfortunately, they don't give instructions for the territory switch (which could probably be wired quite nicely to the single switch), but I think that's available somewhere on Dave Shadoff's site.
     
  3. Xavier

    Xavier Mid Boss

    Territory switch ?

    I saw some back in the day and they had less components than this one and worked fine .

    As far as I know theres no territory switch Its just a matter of changing the connectors to different places
     
  4. ExCyber

    ExCyber Staff Member

    Probably because they weren't switchable. If you just want to do a one-way remapping of the pins all that's really needed is a PCB,

    That's only part of the protection, though from what I've heard it's the only part you need to defeat to play PCE games on a TG16. For the other way around, you apparently need this.
     
  5. Xavier

    Xavier Mid Boss

    Well thats what I was talking about , turn your trubo grafix into a pc engine . Sorry if you got confused .I dont see why it work one way but not the other

    Yes the converters i had were basically pcbs
     
  6. ExCyber

    ExCyber Staff Member

    TG16->PCE works without the switch because PCE games don't (as far as anyone seems to know) actually check that bit.
     

Share This Page