• Rise from your gwave!

Can you move a PAL model 2 psu to a US ntsc saturn model 1 and have it work?

Discussion in 'Saturn' started by Torico, Oct 8, 2018.

  1. Torico

    Torico New Member

    Can you move a PAL model 2 psu to a US ntsc saturn model 1 and have it work?
     
  2. Ponut

    Ponut New Member

    It depends on the motherboard, so it is unlikely to slot in properly. if the pins do match up then it would work. If they do not match, well, you know.

    You should take a multi-meter and check the outputs on the pins and if they are identical then you can swap them.
     

Share This Page