As the title says... I have roughly 20 feet of thin fiber optic light cable left oevr from a model kit which came with an optional electronic light setup, but was far FAR too difficult to install.
I want to try adding some of this to my Saturn case, preferably without drilling holes(the stuff's so thin I'm not sure I could find a suitable bit anyway). There's
plenty of room on the seam between the top and bottom halves and maybe a few bits around the back of the CD lid but my problem is in mounting the cable ends. So far I've been able to mount TWO tiny spots at the front of the case and it's a bit unimpressive in action.
I want to try adding some of this to my Saturn case, preferably without drilling holes(the stuff's so thin I'm not sure I could find a suitable bit anyway). There's
plenty of room on the seam between the top and bottom halves and maybe a few bits around the back of the CD lid but my problem is in mounting the cable ends. So far I've been able to mount TWO tiny spots at the front of the case and it's a bit unimpressive in action.