saturn repair assistance

hey, my power switch to my model 2 saturn needs to be soldered back to the board, but the original wires that connected them are missing, so i have no idea where to solder to. anybody with knowledge or an open saturn could help me out? a diagram or picture would be best. thanks
 
If you can wait another couple of days (if you're still around :unsure: ), I'll open up my Saturn and have a look.
 
Well, I finally opened it up.

The power switch is normally wired to the two pin connector on the far end of the power supply. The one that's right near the mains power socket and the fuse.
 
Back
Top