>_< Help on a US/JP switch

[Riddick]

1 region works, and the other doesnt

not sure if its my soldering skills, the wire layout, or the wire i was using (some Cat-5 i have laying around the house)

My Saturn is a MK-80000A

64 pin IC, 21 pin ribbon

that's the image of the jumper settings. I've already removed the micro-resistors

can someone please tell me what wires do i solder to what jumpers and where they go on a DPDT toggle switch?

I think its a DPDT: two positions, 6 pins on back.

 

[orta]

There is a clear and comprehensive guide at http://www.gamesx.com/importmod/saturncon.htm

check it out it also has a guide of every possible sega saturn jumper points

and by the way the switch that you have is the right one 🙂