Originally posted by PUNJABEE@Fri, 2005-03-11 @ 09:05 PM
How big is the HDD?
[post=131236]Quoted post[/post]
Originally posted by PUNJABEE@Sun, 2005-03-13 @ 04:14 PM
Don't mean to spam your thread, but the Xbox is basically only worth about 180 or so, give or take for the wireless controller.
Used/refurb xboxes are about $120, chips at most are $50, and shipping will be anywhere from $13-$20.
That's under $200 without a bigger hdd, so unless you are charging an extra $50 for the installation of the chip (which would be outrageous).. $240 isn't a very good price.
[post=131401]Quoted post[/post]
Originally posted by PUNJABEE@Tue, 2005-03-22 @ 09:13 AM
Charging money for tools you own or buy and don't give to the buyer is retarded. - charging for this is robbery.
Finding the Dashboard - takes less than 3 minutes. Newsgroups, hell even bit-torrent, and some people even have FTPs. 3 minutes. Secondly once you find a DB, you're done. You dont have to look every single time. It's called burning a CD. - Once again, charging for this is robbery.
Time spent installing the DB. Yeah. It's a real bitch inserting the CD, then clicking "format HDD", then "install dashboard". You can spend a LOT of time here. :looney - AGAIN - robbery.
If you even try to tell me 'physically swapping the hdd is an extra charge'... wow.
Charging money for the actual installation of a chip, sure. But not $50 :wanker
I can see charging for a solder refill every -oh.. i dont know- few months, but what does a solder refill cost? couple of bucks? Come on.
Quit ripping people off and trying to justify it. :slap
[post=131959]Quoted post[/post]
Originally posted by lordofduct@Tue, 2005-03-22 @ 10:21 PM
Also when you look at what I personally charge and not what this kid is charging. I dont charge 50 bucks for install either. 80 bucks, with 54 dollars of that goes towards buying the chip. so im charging a whopping 26 bucks. And if they ever have a problem in the future ill check it out for them. Your estimate of 50 dollars is poor, do some math bugger.
[post=131970]Quoted post[/post]
Originally posted by Lyzel@Wed, 2005-03-23 @ 01:31 AM
I suggest you ignore Punjabee's... he's a thread crapper.
[post=131980]Quoted post[/post]
Originally posted by mal@Wed, 2005-03-23 @ 03:23 AM
OK, you've all put in your 2 cents.
That's enough.
[post=131987]Quoted post[/post]