Okay, I was going to the trouble of adding a 50/60hz switch and a switch to enable/disable the security chip... and now the damn machine won't work. No power is going through it at all - the light LED thing won't even light up. Hence I've fruited the machine... or so it seems.
But my question is how? I lifted pin 30 of the PPU2 without a problem, but had some difficulty with pin 24 of PPU1 (I hate those damn chips...)... which is where I think I've royally stuffed up... or maybe it's from drawing ground and +5v from the oscillator (is that what it's called? Mr I G O? Damn I'm technical ) for both switches?
Any help for this bad modder? I've only ever blown two machines - a Mega Drive in my early days and now my SNES. *sob* and it was in practically mint condition as well I took good care of that one
-Mangaman-
But my question is how? I lifted pin 30 of the PPU2 without a problem, but had some difficulty with pin 24 of PPU1 (I hate those damn chips...)... which is where I think I've royally stuffed up... or maybe it's from drawing ground and +5v from the oscillator (is that what it's called? Mr I G O? Damn I'm technical ) for both switches?
Any help for this bad modder? I've only ever blown two machines - a Mega Drive in my early days and now my SNES. *sob* and it was in practically mint condition as well I took good care of that one
-Mangaman-