Multiregion ?

[Drake007]

Hi there,

hopefully someone could answer it here.

I've got a german PAL 21-pin Sega Saturn (Board Rev. VA9) and want this thing to be modified to multiregion via a switch.

I found some sites with some description about it, but .... well let'S begin!

Which of the Jumperpionts from JP6,7,10,11,12,13 must be soldered with a wire to the 3-way switch? And were should the wires be on the switch?

Must this switch get 5+ Volt?

Maybe there is a website out there which can help with some good pics and an explanation for dumb people like me 🙂

Well the 50/60Hz problem is solved thanks to DjoeN's Website.

regards to all

Drake007

 

[Jurai]

check this, http://johnnys.nailed.org/saturnmod1.html

 

[Drake007]

Well thanks but this is only the JPN/US Mod not the JP/US/UK.

But it helped a little bit.

 

[Drake007]

Well could i use a Triple Throw Triple Pole switch like this here:

1 2 3

4 5 6

7 8 9

Well this is the backside of this switch. The numbers are the solderpoints. Now could someone explain to me which jumer must be connected to this switch?

 

[A Murder of Crows]

you could also use a SPDT Center Off switch and a 7404 hex inverter