I'm trying to hook the internal headers on my first mobo installation on an Intel D875PBZ
My case is a Chieftec Dragon full tower.
I'm a little confused with some of the connections.
I attacthed the diagram from the mobo's manual below
Here's my questions:
I have a plug labeled "Power Sw" -- I'm assuming that goes to the pins labeled "On/Off" -- just want to make sure.
I have a 4 pin plug labeled "Speaker" but I have no clue where that goes or what it does. However on the mobo itself there is some text printed between item A and B of the diagram that says "Speaker" -- but the only plug near it are the ones on the diagram.
I have one 3-pin plug labeled "Power LED". However there are two items on the diagram labeled Power LED -- Item B and a section of Item C.
Then of the plugs for the front UBS Panel, I have all of #1-8 on Item A, but also 2 labeled "2 Ground" in addition to 2 labeled "1 Ground". What's up with those? What are all those for?
Finally, does it matter which way I plug the pins in? (With the text on the left or right?)
Sorry for all the questions, but I don't want to screw anything up.
Thanks in advance!!!
edit: removed the diagram for bandwidth purposes
My case is a Chieftec Dragon full tower.
I'm a little confused with some of the connections.
I attacthed the diagram from the mobo's manual below
Here's my questions:
I have a plug labeled "Power Sw" -- I'm assuming that goes to the pins labeled "On/Off" -- just want to make sure.
I have a 4 pin plug labeled "Speaker" but I have no clue where that goes or what it does. However on the mobo itself there is some text printed between item A and B of the diagram that says "Speaker" -- but the only plug near it are the ones on the diagram.
I have one 3-pin plug labeled "Power LED". However there are two items on the diagram labeled Power LED -- Item B and a section of Item C.
Then of the plugs for the front UBS Panel, I have all of #1-8 on Item A, but also 2 labeled "2 Ground" in addition to 2 labeled "1 Ground". What's up with those? What are all those for?
Finally, does it matter which way I plug the pins in? (With the text on the left or right?)
Sorry for all the questions, but I don't want to screw anything up.
Thanks in advance!!!
edit: removed the diagram for bandwidth purposes