• Rise from your gwave!

Help !

Discussion in 'General Tech Help & CD Burning Help' started by checker, Mar 24, 2002.

  1. checker

    checker New Member

    hoho !

    Somebody knows if the saturn got any fuses ?!

    If i power my saturn on (first Jap Modell) the power led goes on as usual but i got

    no picture and the access led is flashing (all the time ) the cd is spinning but nothing happend no sound and no picture =(
     
  2. CrazyTaxi

    CrazyTaxi New Member

    is your AV cable plugged in correctly?
     
  3. Ratamahatta

    Ratamahatta Member

    it could possibly be a problem with your av cable connection or cable, if the cd is spinning and the access light is always on it seems to be working properly as with some games the access light should be on all the time. try using another av cable.
     
  4. checker

    checker New Member

    the av cable is okey i cecked it on another saturn. the acces led is going on and off and on ans of as long as tge saturn is on the led is doing the same it`s not like normal when the saturn load an game. tghe access led is going on off on off.. even if NO cd is insered !
     
  5. checker

    checker New Member

    the av cable is okey i cecked it on another saturn. the acces led is going on and off and on ans of as long as tge saturn is on the led is doing the same it`s not like normal when the saturn load an game. tghe access led is going on off on off.. even if NO cd is insered !
     
  6. Ratamahatta

    Ratamahatta Member

    if the access led is just blinking for the whole time that your saturn is spinning the disc it is quite possible that your laser is dead in the unit. I had a similar type of problem with an old sega cd system that had.
     
  7. checker

    checker New Member

    but the access led is blinking even theres no cd insered ? and as i said i got no sound or pic
     
  8. Ratamahatta

    Ratamahatta Member

    the access led will blink when theres no disc inserted becasue its waiting for a disc to be inserted as i said, if your laser assembly is dead, it will continue to blink as the system will never know when theres a cd inserted into the system.
     
  9. checker

    checker New Member

    ok ! now i only need to know why i have no pic..
     
  10. Ratamahatta

    Ratamahatta Member

    Do you have any sound at all? (ie: the sega saturn startup)? There is a fuse in the saturn, its by there the ac adapter plugs in. try replacing that, other than that I dont know what to tell you but to buy a new saturn system.
     
  11. Curtis

    Curtis Member

    If that fuse was blown, the system would not power up at all.
     
  12. checker

    checker New Member

    the fuse is okey so i thing my saturn is just DEAD =(
     

Share This Page